Sony UP-27MD, Instructions For Use Manual

Page: 60 / 90

60
To eliminate a horizontal black line on the
top side:
Adjust the capture position at the top edge of
the image to be printed using [V Start].
Note
A horizontal black line may appear at the
bottom of the screen while adjusting the top
edge. You can eliminate it using [V Width].
To eliminate a horizontal black line on the
bottom side:
Adjust the capture position vertical direction
of the image to be printed using [V Width].
To eliminate a vertical black line on the left
side:
Adjust the capture position at the left edge of
the image to be printed using [H Start].
Note
A black line may appear on the right side
while adjusting the left side. You can
eliminate it using [H Width].
To eliminate a vertical black line on the right
side:
Adjust the capture position horizontal
direction of the image to be printed using
[H Width].
To reset the values to factory defaults
For [H Start], [H Width], [V Start] and [V Width],
you can reset the values to factory defaults in
pairs.
To reset the vertical settings to factory default
values, position the cursor at either [V Start] or
[V Width], then press the

and

buttons
simultaneously.
To reset the horizontal settings to factory
default values, position the cursor at either
[H Start] or [H Width], then press the

and

buttons simultaneously.
To check the adjustment result
Print to check that no black frame appears on the
printout, that the image is not partially cut, and
that no black line appears.
Printing to match paper size
1
Follow the step 1 in “When a black frame or
lines show up on printouts” (page 59) to
display the [General Range] screen.
SD (576i) H Start 0 to 72 0
V Start 0 to 48 0
H Width 560 to 720 720
V Width 496 to 576 576
4:3 H Start 0 to 960 240
V Start 0 to 540 0
H Width 720 to 1440 1440
V Width 540 to 1080 1080
5:4 H Start 0 to 960 320
V Start 0 to 540 27
H Width 720 to 1440 1280
V Width 540 to 1080 1026
16:9 H Start 0 to 960 0
V Start 0 to 540 0
H Width 960 to 1920 1920
V Width 540 to 1080 1080
16:10 H Start 0 to 960 96
V Start 0 to 540 0
H Width 960 to 1920 1728
V Width 0 to 72 1080
Aspect
ratio
Setting
item
Setting
range
Default
value
V Start
V Width
H Start
H Width