Sony UP-27MD Instructions For Use Manual Download

Page: 58 / 90

Adjusting the printout sharpness

You can adjust the printout color, contrast,

sharpness, and tone (gamma).

Adjusting the color, contrast and

sharpness

Perform the adjustments while viewing the

images captured in memory.

Display the [Print Setup] tab of the [User

Setup] screen, use the





button to select

[Color Tone], then press the



button.

Adjusting the color, contrast, and sharpness.

Color adjustment

Adjust the color balance using [Cyan-Red],

[Magenta-Green], and [Yellow-Blue]. The

parameters can be adjusted in 15 steps. “0” is the

standard value.

Contrast adjustment

You can adjust the printout brightness using

[Dark] and [Light]. The parameters can be adjusted

in 15 steps. “0” is the standard value.

Adjusting the sharpness

You can adjust the strength of the outlines in a

printout using [Sharpness]. The parameters can be

adjusted in 15 steps. “8” is the standard value.

End : MENU

Load

User Setup

Multi Picture

User Setup

Function

Setup

Output

Setup

Print Setup

White Frames

Caption

Caption Edit

Color Tone

Print Quantity

Print Speed

2ı

High

End : MENU

Color Tone

Cyan-Red

Magenta-Green

Yellow-Blue

Dark

Light

Sharpness

Gamma

Back

Normal

Select the desired item, then perform the adjustment.

Setting

item

Setting

range

(default

value)

Description

Cyan-Red –7 to +7 (0)

Press the



button to make

the image cyan (light blue).

Press the



button to make

the image reddish.

Magenta-

Green

–7 to +7 (0)

Press the



button to make

the image magenta (pink).

Press the



button to make

the image greenish.

Yellow-

Blue

–7 to +7 (0)

Press the



button to make

the image yellowish.

Press the



button to make

the image bluish.

Setting

item

Setting

range

(default

value)

Description

Dark

–7 to +7 (0)

Adjusts the dark area of an

image.

The larger the value, the

darker the dark areas of the

print become.

Light

–7 to +7 (0)

Adjusts the light area of an

image.

The larger the value, the

brighter the bright areas of the

printout become.

Setting

item

Setting

range

(default

value)

Description

Sharpness 1 to 15 (8)

The larger the value, the

stronger the outlines of the

print become.

Press



to blur outlines.

Press



to emphasize

outlines.

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands