UNI-ID7C3 / UNI-ID7T3
Indoor Recessed Dome Housings
Installation and Operation Instructions for the following model:
UNI-ID7C3
Indoor recessed housing, clear lower dome
UNI-ID7T3
Indoor recessed housing, tinted dome
Note:
AC 24V power supply for the camera, ethernet cables and other interface
wiring are installer provided items.
Note:
Please note that to achieve the increased depth with the aspheric design for optimal camera
lens to capsule orientation, the capsule is slightly angled around the highest section. This creates
a ”line’, visible to the naked eye, around the upper most section of the capsule. This “line” serves
as the geometric center line used to insure proper camera placement. It is not typically seen by
the camera. However, Sony RZ series PTZ cameras are able to tilt up above the horizon to 25°,
this wide range of tilt motion at a wide angle view may cause this line to be captured in the image.
Mounting Instructions for:
SNC-RH124
SNC-RZ25
SNC-RZ30
SNC-RZ50
SNC-RX530
SNC-RX550
SNC-RX570
81-IN6568
10-15-2009
Quick Reference:
Camera Installation Steps
SNC-RZ25N............................Go to Step 1
SNC-RZ25N............................Go to Step 2
SNC-RZ50N............................Go to Step 3
SNC-RX Series........................Go to Step 4
SNC-RH/RS.............................Go to Step 5
