Sony Trinitron WEGA KV-DZ29M91, Service Manual, Page: 18 / 170

XYGATE
®
Data Protection
™
Reference Manual
Introduction
XYPRO Technology Corporation
xviii
Proprietary and Confidential
•
Documentation – revised Appendix D: XDP Error Codes for number 394 and
deleted codes number 354 and 389 starting on page 121.
•
Deleted – API procedures for __XYPRO_ENCR_SAVE_KEY and
__XYPRO_ENCR_GET_KEY in Appendix E:.
General Syntax Notation
The following list summarizes the notation conventions for syntax presentation in this
manual.
UPPERCASE LETTERS. Uppercase letters indicate keywords and reserved words;
enter these items exactly as shown. Items not enclosed in brackets are required. For
example:
MAXATTACH
< > Angle Brackets . A pair of matching angle brackets indicate variable items that you
supply but without the brackets. For example where the syntax of a function is stated
as:
RUN $<vol>.<subvol>.XMA INSTALL
and <vol>.<subvol> on your system is equal to $SYSTEM.XYGATEMA, then the
actual command will be as follows:
RUN $SYSTEM.XYGATEMA.XMA INSTALL
[ ] Brackets . Brackets enclose optional syntax items. For example:
TERM [\<system-name>.]$<terminal-name>
INT[ERRUPTS]
A group of items enclosed in brackets is a list from which you can choose one item or
none. The items in the list may be arranged either vertically, with aligned brackets on
each side of the list, or horizontally, enclosed in a pair of brackets and separated by
vertical lines. For example:
FC [ <num> ]
[ <-num> ]
[ <text> ]
K [ X | D ] <address-1>
{ } Braces . A group of items enclosed in braces is a list from which you are required to
choose one item. The items in the list may be arranged either vertically, with aligned
braces on each side of the list, or horizontally, enclosed in a pair of braces and
separated by vertical lines. For example:
LISTOPENS PROCESS { $<appl-mgr-name> }
{ $<process-name> }
ALLOWSU { ON | OFF }