– 13 –
KV
-T25SN81
RM-870
2-7. PICTURE TUBE REMOVAL
NOTE : The picture tube for this model are upside-down, and the position for the anode-cap
and tension spring are changed accordingly.
2
Using a thumb press down then pull up the rubber cap firmly in the direction
indicated by the arrow
b
.
3
When one side of the rubber cap is separated from the anode button, the
anode-cap can be removed by turning up the rubber cap and pulling it up in the
direction of the arrow
c
.
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-caps.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
b
b
c
Anode button
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and the
anode cap to the metal chassis, CRT shield or carbon paint on the CRT.
•
REMOVING PROCEDURES
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
a
a
2 A board
5 Deflection yoke
Cushion
6 Four screws
(Tapping screws)
1 Anode cap
4 C board
3 F1 board
7 VM board
Summary of Contents for TRINITRON KV-T25SN81
Page 17: ... 23 KV T25SN81 RM 870 MEMO ...
Page 18: ... 24 KV T25SN81 RM 870 MEMO ...