manualshive.com logo in svg

Sony TRINITRON KV-SZ25M61, Service Manual, Page: 112 / 113

Share
Download
Sony TRINITRON KV-SZ25M61 Service Manual Download Page 112

24

Additional Information

Sony KV-SZ29N60 Group A9 (

GB

)_2-671-484-11 (1)

TV cannot receive
stereo broadcast

sound

or

Stereo broadcast
sound switches
on and off or is
distorted
(KV-SZ29N60/
SZ25N60 only).

TV cannot receive
FM radio station
(KV-SZ29N60/
SZ25N60 only).

The 

1

 (standby)

indicator on your
TV flashes red
several times after
every three
seconds.

TV cabinet creaks.

A small “boom”
sound is heard
when the TV is
turned on.

• Check the antenna cable and connection on the TV, VCR and at the wall

(see page 21).

• Check the antenna setup. Contact a Sony dealer for advice.

• Connect a separate FM antenna and the TV channel source through an

antenna selector (switch) to your TV (see page 21).

• Count the number of times the 

1

 (standby) indicator flashes.

Press 

!

 (main power) to turn off your TV. Contact your nearest Sony

service center.

• Changes in room temperature sometimes make the TV cabinet expand or

contract, causing a noise. This does not indicate a malfunction.

• The TV’s demagnetizing function is working. This does not indicate a

malfunction.

Symptom

Solutions

continued

01GB08ADV-SOEMPhi.p65

29/12/05, 9:42 AM

24

Black

Summary of Contents for TRINITRON KV-SZ25M61


















































































































Reviews:

No comments