Sony Trinitron KV-ES29 Operating Instructions Manual Download

Page: 46 / 53

Additional Information

Sony KV-ES34 Group A2 (GB)_3-867-756-22 (1)

• Check the antenna cable and

connection on the TV, VCR and at the
wall.

• Press the PRESET button to display

the “MANUAL PROGRAM” menu
and preset the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Try using a booster.

• Press the PRESET button to display

the“MANUAL PROGRAM” menu.
Then, select “

SENS: LOW”.

• Turn off or disconnect the booster if it

is in use.

• If the sound of all the channels are noisy,

display the “CH PRESET” menu and
select “AUTO PROGRAM” to preset the
channels again.

• If the sound of some channels is noisy,

select the channel, then display the
“CH PRESET” menu and select the
appropriate TV system (“TV SYS”).

• Set “DIGITAL IN: OFF” in the “A/V

CONTROL” menu and connect

and R (component video input) on your
TV to receive analog audio signals.

• Check the power cord, antenna and

the VCR connections.

• Press

(power).

• Press

(main power) on the TV to

turn off the TV for about five
seconds, then turn it on again.

Troubleshooting

If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.

Possible cause

Symptom

Solutions

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

Page

–

7, 34

10
11

• The connection is

loose or the cable is
damaged.

• Channel presetting

is inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna

direction needs
adjustment.

• Signal transmission

is low.

• Broadcast signals

are too strong.

• The TV system

setting is
inappropriate.

• The digital audio

signal is
inappropriate.

• The power cord,

antenna or VCR is
not connected.

• The TV is not turned

on.

11/45-52_ES34M91.11GB

31/07/02, 10:46 AM

Summary of Contents for Trinitron KV-ES29






















































Search results

Summary of Contents for Trinitron KV-ES29

Reviews:

Related manuals for Trinitron KV-ES29

Brands by name

Popular brands

Sony Trinitron KV-ES29, Operating Instructions Manual

Search results

Summary of Contents for Trinitron KV-ES29

Reviews:

Related manuals for Trinitron KV-ES29

Brands by name

Popular brands