manualshive.com logo in svg

Sony TRINITRON KV-AR14M50, Service Manual, Page: 91 / 181

Share
Download
Sony TRINITRON KV-AR14M50 Service Manual Download Page 91

28

Additional Information

Sony KV-AR21M61 Group A8 (

GB,

 CT, MY)_4-097-222-14 (1)

Possible cause

Symptom

Solutions

Abnormal color
patches

TV cannot receive
stereo broadcast
sound.

or

Stereo broadcast
sound switches
on and off or is
distorted.

(KV-AR21M61 only)

“100” appears at
the top left of
screen and there
is no teletext
display
(KV-AR21M61 only).

Teletext display is
incomplete (snowy
picture or double
images)

(KV-AR21M61 only).

The 

1

 (standby)

indicator on
your TV flashes
red several
times after
every three
seconds.

–

24

–

13

24

–

–

22

–

• The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

• The connection is loose

or the cable is damaged.

• The antenna setup is

inappropriate.

• The channel carries

no Teletext
broadcast.

• Connection is loose or

the cable is damaged.

• The antenna setup is

inappropriate.

• Signal transmission

is too low.

• Your TV’s self-

diagnosis function
indicates the possible
problems.

• Keep external speakers or other

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press 

!

 (main power) on the TV to turn

off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

––

• Check the antenna cable and connection

on the TV, VCR, and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Try using a booster.

• Use the fine tuning (“Fine”) function.

• Count the number of times the 

1

(standby) indicator flashes. Press 

!

(main power) to turn off your TV.
Contact your nearest Sony service center.

Page

continued

01GB08ADV-MIX.p65

31/7/03, 12:06 PM

28

Summary of Contents for TRINITRON KV-AR14M50






















































































































































































Reviews:

No comments