Sony TRINITRON KV-AR14M50 Service Manual Download Page 177

Page: 177 / 181

Additional Information

Sony KV-AR21M61 Group A10 (

GB,

TH)_4-097-273-13 (1)

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

Possible cause

Symptom

Solutions

Troubleshooting

If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.

Page

–

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Try using a booster.

• Turn off or disconnect the booster if it is in

use.

• Display the “Channel Setup” menu and

select the appropriate “TV System”.

• Check the power cord, antenna and VCR

connections.

• Press

?/1

(power).

• Press

(main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate
(KV-AR21M61 only).

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

Troubleshooting guide

01GB08ADV-SSITHA.p65

7/29/03, 2:38 PM

Summary of Contents for TRINITRON KV-AR14M50






















































































































































































Search results

Summary of Contents for TRINITRON KV-AR14M50

Reviews:

Sony TRINITRON KV-AR14M50, Service Manual, Page: 177 / 181

Search results

Summary of Contents for TRINITRON KV-AR14M50

Reviews: