49
Main Operation Window
Chapt
er
3
Men
u
Wind
o
w
Vertical:
Sets the vertical position of the marker.
Set to –35 (downward) to +35 (upward). [0]
Close:
Closes the Marker Preset window.
i
More Settings
Sets the details of the Configurations tab window.
When the button is clicked, the More Settings window is
displayed.
Screen Aspect:
Selects the aspect ratio.
This item is not selectable when Format is set to DVI
Computer.
HD:
Sets the aspect ratio of the HD signal.
You can select from [16:9] or 2.39:1.
DC 2048 × 1080:
Sets the aspect ratio of the digital
cinema signal (2048 × 1080).
You can select from [1.896:1] or 2.39:1.
HDMI Auto:
Sets the manual or automatic setting for
the aspect ratio of the HDMI signal.
[On]:
Select to set the aspect ratio automatically
according to the input signal. The aspect ratio is not set
manually.
Off:
Select to set the aspect ratio manually.
RGB Range:
Sets the quantization range of the DVI or
HDMI input signal.
You can select this item when Format is set to DVI Video,
DVI Computer or HDMI.
DVI Video:
Sets the display mode for the DVI Video
signal.
Full:
0 (black level) to 255 (white level) (8bit)
[Limit]:
16 (black level) to 235 (white level) (8bit)
DVI Computer:
Sets the display mode for the DVI
Computer signal.
[Full]:
0 (black level) to 255 (white level) (8bit)
Limit:
16 (black level) to 235 (white level) (8bit)
HDMI:
Sets the display mode for the HDMI signal.
Full:
0 (black) to 255 (8bit)/1023 (10bit)/4095 (12bit)
(white level)
[Limit]:
16 (8bit)/64 (10bit)/256 (12bit) (black level)
to 235 (8bit)/940 (10bit)/3760 (12bit) (white level)
HDMI Auto
: Sets the manual or automatic setting for
the quantization range of the HDMI signal.
[On]:
Select to set the quantization range
automatically according to the input signal.
Off:
Select to use the quantization range set in HDMI.
Film Cadence:
Sets the film cadence mode.
This item is not selectable when Format is set to DVI
Computer.
The progressive picture is reproduced according to the
setting.
[Off]:
The progressive conversion signal is not
displayed in film cadence mode.
2-2:
When the interlace signal of 2-2 pull-down
processing is input
2-3:
When the interlace signal of 2-3 pull-down
processing is input
2-3-3-2:
When the interlace signal of 2-3-3-2 pull-
down processing is input
• When the 50i interlace signal is input, the mode is
automatically set to 2-2, even when 2-3 or 2-3-3-2 is
selected.
• The signal is not displayed in film cadence mode when
1080i interlace signal is input and 1080PsF is selected in
1080I/PsF. Set to 1080I.
• As the signal is displayed in film cadence mode by
cadence sequence detection based on the sequential
pattern of the input signal, some patterns of the input
signal may not be displayed correctly.
Close:
Closes the More Settings window.
Note
More Settings
Close
Screen Aspect
HD
16:9
Film Cadence
Off
DC 2048×1080
1.896:1
HDMI Auto
On
Off
HDMI Auto
On
Off
DVI Video
RGB Range
Limit
Full
DVI Computer
Limit
HDMI
Notes
Summary of Contents for Trimaster SRM-L560
Page 136: ...Sony Corporation ...
