SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
SPECIFICATIONS
SURROUND AMPLIFIER
9-887-986-04
2008I05-1
©
2008.09
TA-SA100WR
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
• TA-SA100WR is the surround amplifi er section
in WAHT-SA1 etc.
• EZW-RT10 or EZW-T100 is necessary to check
S-AIR communication.
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 3 ohm loads,
both channels
driven, from 120 -
20,000 Hz; rated 50
watts per channel
minimum RMS
power, with no
more than 0.7 %
total harmonic
distortion from 250
milliwatts to rated
output.
Amplifier section
US model:
Surround mode (reference) RMS output power
: 143W (per
channel at 3 ohms,
1 kHz, 10 % THD)
Other models:
Stereo mode (rated)
80 W + 80 W (at
3 ohms, 1 kHz, 1 %
THD)
Surround mode (reference) RMS output power
: 143 W (per
channel at 3 ohms,
1 kHz, 10 % THD)
* Depending on the source, there may be no
sound output.
Rated impedance:
3 - 16
Ω
General
Power requirements:
North American and
Mexican models:
120 V AC, 60 Hz
Taiwan model:
120 V AC, 50/60 Hz
Latin American model:
110 V – 240 V AC,
50/60 Hz
Other models:
220 V – 240 V AC,
50/60 Hz
Korean model:
220 V AC, 60 Hz
Thai model:
220 V AC, 50/60 Hz
Power consumption
On: 50 W
Dimensions (approx.)
85 mm × 100 mm ×
330 mm
(3
3
/
8
in × 4 in ×
13 in) (w/h/d) (incl.
EZW-RT10)
85 mm × 100 mm ×
345 mm
(3
3
/
8
in × 4 in ×
13
5
/
8
in) (w/h/d)
incl. speaker cord
cover and speaker
cord holder
Mass (approx.)
1.7 kg (3 lb 12 oz)
incl. speaker cord
cover and speaker
cord holder
Design and specifications are subject to change
without notice.
“S-AIR” and its logo are trademarks of Sony
Corporation.
