Sony STW-C140GI, Operating Instructions Manual

Page: 18 / 116

GB
18
3
Press the +/– button repeatedly to
select the channel.
There are two channel groups: “G”
(green indicator) and “Y” (yellow
indicator).
4
Press the SEL button to set the
channel.
The channel indicator stays lit.
The HI/VI indicator starts blinking.
5
Press the +/– button to choose HI or
VI.
6
Press the SEL button again to set the
audio setting.
The HI/VI indicator and POWER
indicator stay lit.
For Captioning mode, follow the
instructions as follows to select language.
Select the closed caption language.
Selectable languages and their order are set
up by the Data Transmitter STWA-C101.
For how to set up, refer to the operating
instructions included with STWA-C101.
1
Press and hold the + and – buttons
simultaneously until the language
menu appears on the glasses.
It takes about two seconds.
2
Press the +/– button repeatedly to
select the language.
3
Press the SEL button to set the
language.
• After 10 seconds of no operation, the menu
disappears and the language setting remains
unchanged.
• The default language setting is “Language
No.1.” When the receiver box is turned on,
the language setting returns to the default
setting.
Language Selection
(Captioning Mode)
Notes