manualshive.com logo in svg

Sony STR-ZA810ES, Manual

Share
Download
Sony STR-ZA810ES Manual Download Page 112

registered, the least recently connected BLUETOOTH receiver will be replaced by the new ones.

This receiver can display up to 15 detected BLUETOOTH receiver in the [Device List].

You cannot change the sound effects or settings in the options menu while transmitting sound.

Some content cannot be output due to copyright protection.

The audio output from the BLUETOOTH receiver may be delayed compared to that from this
receiver because of the characteristics of BLUETOOTH wireless technology.

No sound is output from the speakers or HDMI OUT jacks when BLUETOOTH receiver is
successfully connected to this receiver.

The [Bluetooth] and Home Theatre Control functions are disabled when [Bluetooth Mode] is set to
[Transmitter].

This receiver does not support the NFC connection with BLUETOOTH receiver.

Hint

You can enable or disable the reception of AAC or LDAC audio from the BLUETOOTH device.

You can also switch the [Bluetooth Mode] using BLUETOOTH RX/TX on the remote control.

If the BLUETOOTH device in step 3 is the most recently connected device, you can connect it to this
receiver automatically by simply pressing BLUETOOTH RX/TX on the remote control. In this case,
you do not need to perform step 4.

[111] Using BLUETOOTH Features

Listening with BLUETOOTH receiver

(headphones/speakers)

Compatible BLUETOOTH version and profiles

“Profile” refers to a standard set of capabilities for various BLUETOOTH product capabilities.
This receiver supports the following BLUETOOTH version and profiles:

Compatible BLUETOOTH version:

 BLUETOOTH Specification Version 4.1

Compatible BLUETOOTH profiles:

A2DP 1.2 (Advanced Audio Distribution Profile): Receives high-quality audio content.
AVRCP 1.5 (Audio Video Remote Control Profile): Controls audio/video devices
(pausing, stopping, starting playback, volume control, etc.) (*)

For the latest information about compatible BLUETOOTH devices, check the websites listed
under “Customer support websites.”

Note

The functions may differ depending on the specifications of the BLUETOOTH device.

The audio playback on this receiver may be delayed from that on the BLUETOOTH device because
of the characteristics of the BLUETOOTH wireless technology.

[112] Using BLUETOOTH Features

Using SongPal to control the receiver from a

Absolute volume is supported only when [Bluetooth Mode] is set to [Receiver]. When [Bluetooth Mode] is set to
[Transmitter], volume command for AVRCP 1.3 is supported.

*

Summary of Contents for STR-ZA810ES




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands