manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 41

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Connecting 7.1-channel speaker system

Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see “

How to connect speaker cables

.”

 

Monaural audio cable (not supplied)

 

Speaker cable (not supplied)

Note

After you have installed and connected your speakers, set the speaker pattern to [7.1] using [Speaker Pattern] in the [Speaker
Setup] menu.

Connect speaker cables properly with the polarities (+/–) matched between the speaker cables and the SPEAKERS terminals.

Related Topic

Locations and names of speakers

Installing 7.1-channel speaker system
Speaker configuration and speaker pattern settings

Assigning the surround back speaker terminals (SB Speaker Assign)

Selecting the speaker pattern (Speaker Pattern)

41

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands