manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 230

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Selecting the method to use the HDMI OUT B (ZONE 2) jack (HDMI Out B Mode)

You can use the HDMI OUT B (ZONE 2) jack can be used for the Zone 2 output.

Note

When [Zone2] is selected, the Control for HDMI function and Fast View function do not work.

When [Main] is selected, HDMI IN audio signals cannot be output to Zone 2 speakers and the PRE OUT jacks unless the input
for Zone 2 is SOURCE or the same input is selected in the main zone and Zone 2.

When [Zone2] is selected, the HDMI OUT B (ZONE 2) jack supports bandwidth up to 9 Gbps.

4-686-529-11(5) Copyright 2017 Sony Corporation

Select [Setup] - [HDMI Setup] from the home menu.

1

Select [HDMI Out B Mode].

2

Select the setting you want.

Main:

 Uses the jack for the main zone output. Recommended when you enjoy TV or projector content in only

one room (main zone).

Zone2:

 Uses the jack for the Zone 2 output. Recommended when you enjoy video and sound from a device

connected to the receiver in a zone other than the main zone (Zone 2).

3

230

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands