manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 215

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Setting the low-pass filter for the subwoofer output (Subwoofer Low Pass Filter)

You can turn the low-pass filter for the subwoofer output on or off. You can set the function for each input to which an
audio input jack is assigned independently. Turn the function on if you connect a subwoofer without the crossover
frequency function.

Note

This function does not work when [Direct] is being used and an analog input is selected.

4-686-529-11(5) Copyright 2017 Sony Corporation

Select [Setup] - [Audio Setup] from the home menu.

1

Select [Subwoofer Low Pass Filter].

2

Select the setting you want.

On:

 Always activates the low-pass filter with a cutoff frequency of 120 Hz.

Off:

 Does not activate the low-pass filter.

3

215

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands