manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 210

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Playing audio signals with high-quality sound (Digital Legato Linear (D.L.L.))

The D.L.L. function is a technology developed by Sony that allows low-quality digital and analog audio signals to be
played with high-quality sound.

Note

This function works when [2ch Stereo], [Direct], [A.F.D.] or [Multi Stereo] is selected. However, this function does not work in the
following cases:

The [In-Ceiling Speaker Mode] function is being used.
[FM TUNER] or [AM TUNER] is selected as the input.
Linear PCM signals with a sampling frequency other than 44.1 kHz are being received.
Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS 96/24, DTS-ES Matrix 6.1, DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS:X, or DTS:X Master Audio signals are being received.
When [Zone2 Power] is set to [On] (depending on the Zone 2 or HDMI settings).
When IMAX Mode is activated.

4-686-529-11(5) Copyright 2017 Sony Corporation

Select [Setup] - [Audio Setup] from the home menu.

1

Select [Digital Legato Linear].

2

Select the setting you want.

Auto 1:

 This function is available for lossy compression audio formats and analog audio signals.

Auto 2:

 This function is available for Linear PCM signals, as well as lossy compression audio formats and

analog audio signals.

Off

3

210

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands