manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 136

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Adjusting the crossover frequency settings for IMAX Enhanced content playback
(IMAX ADJUSTMENT)

When you watch IMAX Enhanced content, the following settings are deactivated so as not to interfere with the sound of
the content.

[2.11. CROSSOVER FREQUENCY]
[4.6. SUBWOOFER LOW PASS FILTER]

However, IMAX Enhanced content may not be reproduced adequately depending on the size and specifications of your
speakers.
If adjustment is necessary when watching IMAX Enhanced content, perform the following operations.
The function only works when a DTS stream is input.

Adjusting the crossover frequency for front, center, surround, and/or height speaker output
Adjusting the crossover frequency for the subwoofer output

Adjusting the crossover frequency for front, center, surround, and/or height speaker output

Adjusting the crossover frequency for the subwoofer output

Note

The setting value for surround speakers is applied to surround back speakers.

Press AMP MENU.
The menu is displayed on the display panel of the receiver.

1.

Press 

/

 repeatedly to select [4. AUDIO SETUP], then press 

.

2.

Press 

/

 repeatedly to select [4.13. IMAX ADJUSTMENT], then press 

.

3.

Press 

/

 repeatedly to select [4.13.1. HPF/CROSSOVER], then press 

.

4.

Press 

/

 repeatedly to select the speaker for which you want to adjust the crossover frequency, then press 

.

You can select from the following speakers.

For the STR-ZA3100ES/ZA2100ES: FRONT, CENTER, SURROUND, HEIGHT1 or HEIGHT2
For the STR-ZA1100ES: FRONT, CENTER, SURROUND or HEIGHT

5.

Press 

/

 repeatedly to select a setting between 40 Hz and 200 Hz, then press 

.

6.

Press AMP MENU.
The menu is displayed on the display panel of the receiver.

1.

Press 

/

 repeatedly to select [4. AUDIO SETUP], then press 

.

2.

Press 

/

 repeatedly to select [4.13. IMAX ADJUSTMENT], then press 

.

3.

Press 

/

 repeatedly to select [4.13.2. LPF FOR SUBWOOFER], then press 

.

4.

Press 

/

 repeatedly to select a setting between 40 Hz and 200 Hz, then press 

.

5.

136

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands