manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 126

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Changing the AM tuning scale

You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver.  
Be sure to use the buttons on the receiver to perform this operation.

Note

Depending on the settings, the receiver may take some time to change the AM tuning scale.

All preset stations will be erased when you change the tuning scale.

4-686-529-11(5) Copyright 2017 Sony Corporation

Turn off the receiver.

1

Hold down TUNING MODE and press 

 (power) on the receiver.

The current AM tuning scale is changed to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure above.

2

126

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands