manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 110

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

6. Checking Auto Calibration results

To check error codes or warning messages received in [Auto Calibration], proceed with the following steps:

If an error code appears

Check the error and perform Auto Calibration again.

If a warning message appears

Check the warning message and select [OK]. For details on the warning messages, see “

List of messages after Auto

Calibration measurements

.”

Hint

The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that
value does not cause problems.

Related Topic

List of messages after Auto Calibration measurements

4-686-529-11(5) Copyright 2017 Sony Corporation

Select [Retry].

1

Follow the instructions on the TV screen and then press 

 to select [Start].

The measurement starts in 5 seconds.  
The measurement process will take approximately 30 seconds with a test tone. 
When the measurement ends, a beep sounds and the screen switches.

2

Select the item you want.

Save:

 Saves the measurement results and exits the setting process.

Retry:

 Performs the Auto Calibration again.

Discard:

 Exits the setting process without saving the measurement results.

3

Save the measurement results.

Select [Save] in step 3.

4

110

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands