The signals of the current input in main zone are output when [SOURCE] is selected.
*2
When [FM TUNER] or [AM TUNER] are selected at the same time in the main zone and zone 2 or
zone 3, the item most recently selected will be set.
Note
When the receiver is in standby mode, the
(on/standby) indicator on the front panel
lights up in amber if the receiver in zone 2 or zone 3 is turned on.
Audio signals are not output to zone 2 when receiving a DSD signal via HDMI.
Digital audio signals are output to zone 2 only when receiving a 2ch PCM signal. Digital
audio stream signals such as Dolby Digital signals are not output to zone 2. When
outputting optical/coaxial audio signals, set the audio output to PCM on the connected
device. For details, refer to the operating instructions of the connected device.
If you change the sound field or speaker settings in the main zone while the input for zone
2 is set to SOURCE or the same input is selected in the main zone and zone 2, the sound
may also be momentarily interrupted in zone 2.
[45] Using Other Features
Interlocking with BRAVIA TV and other devices (“BRAVIA”
Sync)
What is “BRAVIA” Sync?
The “BRAVIA” Sync function allows communication between products made by Sony such
as TVs, Blu-ray Disc Players, DVD players, and AV amplifiers that support the Control for
HDMI function.
Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-Definition Multimedia Interface).
We recommend that you connect the receiver to products featuring “BRAVIA” Sync.
[46] Using Other Features
Interlocking with BRAVIA TV and other devices (“BRAVIA”
Sync)
Preparing for “BRAVIA” Sync
Turn on the Control for HDMI function of the receiver and the connected device to
individually.
1. Select [Setup] - [HDMI Setup] from the home menu.
2. Select [Control for HDMI].
