Sony STR-ZA1000ES User Manual Download

Page: 168 / 187

[164] Troubleshooting

Remote control

The remote control does not function.

Point the remote control at the remote control sensor on the receiver.

Remove any obstructions between the remote control and the receiver.

Replace both of the batteries in the remote control with new ones if they are weak.

[165] Troubleshooting

If the problem is not solved

Reverting to the factory default settings

You can clear all memorized settings and restore the receiver to the factory default settings

by the following procedure. This procedure can also be used to initialize the receiver before

you use it for the first time.

Be sure to use the buttons on the receiver to perform this operation.

1. Turn off the receiver.

2. Hold down

(on/standby) on the receiver for 5 seconds.

[MEMORY CLEARING] appears on the display panel for a while, then changes to

[MEMORY CLEARED!] .

Note

Do not turn the receiver off until [MEMORY CLEARED!] appears on the display panel.

[166] Troubleshooting

If the problem is not solved

Resetting sound fields to the default settings

Be sure to use the buttons on the receiver to perform this operation.

1. Turn off the receiver.

2. Hold down MULTI ST. and press

(on/standby) on the receiver.

[S.F. INITIALIZED!] appears on the display panel and all sound fields are reset to their

Summary of Contents for STR-ZA1000ES




























































































































































































Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands

Sony STR-ZA1000ES, User Manual

Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands