50
US
If you cannot tune to a
station
“– – – .– – MHz” or “– – – – kHz” appears
and then the screen returns to the current
frequency.
Make sure you have entered the right
frequency. If not, repeat step 2. If you still
cannot tune to a station, the frequency may
not be in use in your area.
You can change the AM tuning scale to
either 9 kHz or 10 kHz using the buttons on
the receiver.
1
Press
?
/
1
to turn off the receiver.
2
While holding down TUNING
MODE, press
?
/
1
on the receiver.
The current AM tuning scale is
changed to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
• Depending on the settings, the receiver may take
some time to change the AM tuning scale.
• All preset stations will be erased when you
change the tuning scale.
Presetting FM/AM radio
stations
(Preset Memory)
You can store up to 30 FM and 30 AM
stations as your favorite stations.
1
Tune to the station that you want to
preset using Auto Tuning (page 49)
or Direct Tuning (page 49).
2
Select “Preset Memory”, then
press .
3
Select a preset number, then press
.
The station is stored as the selected
preset number.
4
Repeat steps 1 to 4 to store
another station.
You can store station as follows:
• AM band: AM 1 to AM 30
• FM band: FM 1 to FM 30
1
Select “FM” or “AM” from the
menu, then press
.
2
Select “Select Preset”, then press
.
3
Select the preset station you want,
then press
.
Preset numbers from 1 to 30 are
available.
Changing the AM tuning
scale
Notes
?
/
1
TUNING MODE
Tuning to preset
stations
OPTIONS
V
/
v
/
B
/
b
,
Summary of Contents for STR-DN840
Page 1: ...4 454 467 13 1 STR DN840 Multi Channel AV Receiver Operating Instructions ...
Page 138: ......
Page 139: ......
Page 140: ... 2013 Sony Corporation Printed in Malaysia 4 454 467 13 1 ...