Hint
You can check the remaining time before the receiver turns off on the System Settings screen. Also,
the remaining time appears on the bottom right of the TV screen when it becomes 1 minute or less.
The sleep timer will be canceled if you perform the following:
Select [Off] in step 3.
Turn the receiver on or off.
Update the software of the receiver.
[146] Using Other Features
Saving power during standby mode
You can save power by setting up the receiver as follows:
Set [Control for HDMI] and [Standby Through] in the [HDMI Settings] menu to [Off].
Set [Remote Start] and [Network Standby] in the [Network Settings] menu to [Off] (for USA,
Canadian and Asia-Pacific models only).
Set [Bluetooth Standby] in the [Bluetooth Settings] menu to [Off].
Set [Zone2 Power] or [HDMI Zone Power] in the [Zone Controls] menu to [Off].
[147] Using Other Features
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the sound
field.
Select [Sleep].
2
Set specified time.
2:00:00
1:30:00
1:00:00
0:30:00
Off
[SLEEP] lights up on the display panel of the receiver when sleep timer is being used.
3
Select the input for which you want to check information.
1
Press DISPLAY MODE on the receiver repeatedly.
Each time you press DISPLAY MODE, the display will change cyclically as follows:
Index name of the input (*1) - Input you selected - Sound field currently applied (*2) -
Volume level - Stream information (*3)
2
