Sony STR-DN1010 - Multi Channel Av Receiver Operating Instructions Manual Download Page 36

Page: 36 / 136

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-

(1)

Insert the wireless transmitter.

Notes

• Insert the wireless transmitter with the S-AIR

logo facing up.

• Insert the wireless transmitter so that the

marks are aligned.

• Do not insert other than the wireless

transmitter into the EZW-T100 slot.

Use the screws that you removed from
step 1 to fasten the wireless
transmitter.

Note

Do not use other screws to fasten the wireless
transmitter.

To insert the wireless
transceiver into the S-AIR sub
unit

Refer to the operating instructions supplied
with the surround amplifier and S-AIR
receiver.

7: Connecting the AC
power cord (mains lead)

Connect the AC power cord (mains lead) to a
wall outlet.

Notes

• Before connecting the AC power cord (mains

lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.

• Connect the AC power cord (mains lead) firmly.

Wireless transmitter

EZW-T100 slot

AC power cord (mains lead)

To the wall outlet

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver









































































































































Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands

Sony STR-DN1010 - Multi Channel Av Receiver, Operating Instructions Manual

Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands