53
GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm
masterpage: Right
STR-DN1010
4-174-068-
11
(1)
T
u
n
e
r Op
era
tio
ns
1
Press the input button of the
playback component.
You can also use INPUT SELECTOR
+/– on the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jacks) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
35).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 4.
* The AM tuning scale can be changed (page 55).
Recording onto a recording
media
Tuner Operations
Area code
FM
AM
U2, CA2
100 kHz
10 kHz*
CEK, ECE, AU1, TW2 50 kHz
9 kHz
V
/
v
/
b
,
GUI MODE
MENU
TOOLS/
OPTIONS
SHIFT
Numeric
buttons
