Sony STR-DN1010 - Multi Channel Av Receiver Operating Instructions Manual Download Page 20

Page: 20 / 136

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-

(1)

Tips

• When you connect a 7.1 channel speaker system

with two surround back speakers, all angle

should be the same.

• When you connect a 7.1 channel speaker system

with two front high speakers, place the front high
speakers
– at an angle between 22° to 45°.
– at least 3.3 feet (1 meter) directly above the front

speakers.

• When you connect a 6.1 channel speaker system,

place the surround back speaker behind the
listening position.

• Since the subwoofer does not emit highly

directional signals, you can place it wherever you
want.

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver









































































































































Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands

Sony STR-DN1010 - Multi Channel Av Receiver, Operating Instructions Manual

Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands