38
GB
D:\NORM'S JOB\SONY HA\SO17_STR-DH190_PMRF1\STR-DH190 (PMRF
01)\4726907121_GB\080TRU.fm
masterpage: Left
STR-DH190
4-726-907-
12
(1)
Frequency band and maximum output power
(European models only)
BLUETOOTH
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, cordless phone, reception
sensitivity, antenna’s performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
General
Power requirements
Power consumption
200 W
Standby mode: 0.3 W
(When “BT STBY” is set to “STBY OFF”.)
BLUETOOTH Standby mode (all wireless
network ports are activated): 1.0 W
(When “BT STBY” is set to “STBY ON”.)
Dimensions (width/height/depth) (Approx.)
430 mm × 133 mm × 284 mm (17 in ×
5 1/4 in × 11 1/4 in) including projecting
parts and controls
Mass (Approx.)
6.7 kg (14 lb 13 oz)
Design and specifications are subject to
change without notice.
On BLUETOOTH
Communication
Supported BLUETOOTH version and
profiles
Profile refers to a standard set of functions
for various BLUETOOTH product features.
See “BLUETOOTH section” in
“Specifications” (page 37) for the
BLUETOOTH version and profiles supported
by this receiver.
Effective communication range
BLUETOOTH devices should be used within
approximately 10 meters (33 feet)
(unobstructed distance) of each other. The
effective communication range may
become shorter under the following
conditions.
• When a person, metal object, wall or
other obstruction is between the devices
with a BLUETOOTH connection
• Locations where a wireless LAN is
installed
• Around microwave ovens that are in use
• Locations where other electromagnetic
waves are generated
Effects of other devices
BLUETOOTH devices and wireless LAN
(IEEE 802.11b/g/n) device use the same
frequency band (2.4 GHz). When using your
BLUETOOTH device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result in
lower data transfer rates, noise, or inability
to connect. If this happens, try the
following remedies:
• Use this receiver at least 10 meters
(33 feet) away from the wireless LAN
device.
• Turn off the power to the wireless LAN
device when using your BLUETOOTH
device within 10 meters (33 feet).
Frequency
band
Maximum output
power
2,400 MHz –
2,483.5 MHz
≤ 6.0 dBm
Area
Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Oceania
230 V AC, 50 Hz
Europe
230 V AC, 50/60 Hz
