26
GB
PHONES
Use to connect headphones.
When the headphones are connected, speaker
output is automatically canceled and “SP.
OFF” lights up in the display.
When the headphones are connected, selectable
sound fields are HEADPHONE (2CH),
HEADPHONE (DIRECT), HEADPHONE
(MULTI) and HEADPHONE (THEATER)
(page 30).
Note
When “HEADPHONE (MULTI)” appears in the
display while the headphones are connected, only the
front L/R signals of the multi channels are output
from the headphones.
Selecting the component (continued)
Changing the display
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component*
t
Selected
component
t
Sound field applied to the
program source
When the tuner is selected
Index name of the preset station*
t
Frequency
t
Sound field applied to the band
or the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 40).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
function.
DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (5 steps).
When set to the dimmest setting, the display
and the blue LED are turned off. However,
when you press any button, the display
becomes the brightest setting temporary.
