127
GB
Adju
stin
g Setti
ngs
Quick Click settings
You can make settings to control components
connected to the receiver using the on-screen
remote.
See “Operating Each Component Using the
On-screen Remote (Quick Click)” (page 136)
for details on using the on-screen remote.
Selects the source component that is to be
operated.
x
Preset Mode
Customizes the remote to match the source
components connected to your receiver.
x
Learn Mode
Allows the remote learn codes.
x
Reset
Resets both programmed codes and learned
codes.
Selects the common component such as a TV,
projector or lights that is to be operated.
x
Preset Mode
Customizes the remote to match the common
components such as the TV, the projector and
the lightings connected to your receiver.
x
Learn Mode
Allows the remote to learn codes.
x
Reset
Resets both programmed codes and learned
codes.
Sets several commands in a sequential order as
a single command.
System settings
Customizes the settings of the receiver.
Let you turn the control mode for maintenance
and service on or off.
x
OFF
x
ON
Lets you turn the function that switches the
main zone to standby mode automatically
when you do not operate the receiver or when
there is no signal input to the receiver on or off.
x
ON
Switches to standby mode after approximately
30 minutes.
x
OFF
Does not switch to standby mode.
Note
This function does not work when “Server,”
“Rhapsody,” “SHOUTcast,” “FM,” “AM,”
“SIRIUS,”or the multi-channel input is selected.
Lets you lock the settings of the receiver.
x
ON
You can only turn this function on using the
setting menu. When you turn this function off,
perform the following procedure.
Source Component
Common Component
Macro
RS232C Control
Auto Standby
Settings Lock
continued
Summary of Contents for STR-DA4600ES - 7.1 Channel Es Receiver
Page 170: ...170GB ...