Sony STR-DA4400ES, Operating Instructions Manual

Page: 11 / 298

11 GB
H
L.F.E. Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
I
DSD Lights up when the receiver
is receiving DSD (Direct
Stream Digital) signals
(page 31).
J
Tuning
indicators Lights up when the receiver
tunes in radio stations, or
satellite radio stations.
STEREO Stereo broadcast
MONO Monaural broadcast
XM The XM Mini Tuner and
Home Dock are connected
and “XM” is selected.
SIRIUS The SiriusConnect Home
tuner is connected and
“SIRIUS” is selected.
CAT The category mode is
selected during the satellite
radio operation.
PRESET The tuning mode is set to
the preset mode.
MEMORY A memory function, such as
Name Input, etc., is
activated.
K
BI-AMP Lights up when surround
back speakers selection is
set to “BI-AMP.”
Name Function
L
D.RANGE Lights up when dynamic
range compression is
activated.
M
VOLUME Displays the current
volume.
N
Dolby
Digital
Surround
indicators Lights up one of the
respective indicators when
the receiver is decoding the
corresponding Dolby
Digital format signals.
;
D Dolby Digital
; D+ Dolby Digital Plus
;
D EX Dolby Digital Surround EX
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “Analog.”
O
DTS-HD
indicators Light up when the receiver
is decoding DTS-HD.
DTS-HD Lights up constantly with
the one of the following
indicators.
MSTR DTS-HD Master Audio
LBR DTS-HD Low Bit Rate
Audio
HI RES DTS-HD High Resolution
Audio
P
;
TrueHD Lights up when the receiver
is decoding Dolby TrueHD.
Q
L-PCM Lights up when Linear
PCM (Pulse Code
Modulation) signals are
input.
Name Function
continued