Sony STR-DA4300ES - Multi Channel Av Receiver, Operating Instructions Manual, Page: 43 / 302

43
GB
F:\Sony\_DA4300\_DTP\3209655111\3209655111STRDA4300ESUC\01GB-
STRDA4300ESUC\030CON.fm masterpage: Right
STR-DA4300ES
3-209-655-
11 (1)
G
e
tting Star
te
d
4
Press V / v repeatedly to select
“Impedance,” then press .
5
Press V / v repeatedly to select
“4
Ω
” or “8
Ω
” depending on
the speakers you are using,
then press
.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
impedance of 8 ohms or higher, set “Impedance” to
“8
Ω
.” When connecting other types of speakers,
set it to “4
Ω
.”
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both “A” and “B”
configuration:
Set “Impedance” to “8
Ω
” in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set “Impedance” to “4
Ω
” in the Speaker
settings menu.