46
US
Set “Speaker Impedance” to “4
Ω
” in the
Speaker Settings menu.
To select the front speakers
You can select the front speakers you want to
drive.
Press SPEAKERS (A/B/A+B/OFF)
repeatedly to select the front speaker
system you want to drive.
You can confirm which set of terminals (
A
or
B
) are selected by checking the indicators in
the display window.
To cancel the measurement
process
The measurement process is cancelled by the
following operations.
– Turning the power off
– Changing the volume
– Switching inputs
– Changing the setting of SPEAKERS (A/B/
A+B/OFF)
– Connecting headphones
Operations other than the above are not
allowed during the measurement process.
To set up the receiver manually
See “Adjusting Settings” (page 90).
Indicators
Selected speakers
SP A
The speakers connected to the
FRONT
A
terminals.
SP B
The speakers connected to the
FRONT
B
terminals.
SP AB
The speakers connected to both the
FRONT
A
and FRONT
B
terminals (parallel connection).
“SPEAKERS OFF” appears in the
display window.
No audio signals are output from any
speaker.
SPEAKERS (A/B/A+B/OFF)
