103
US
Adj
u
stin
g Sett
ings
x
TV+AMP
The sound is output from the TV speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback equipment
depends on the TV’s sound quality, such as the
number of channels, and the sampling frequency,
etc. If the TV has stereo speakers, the sound output
from the receiver is also in stereo as that of the TV,
even if you play multi-channel source.
• When you connect the receiver to a video
equipment (projector, etc.), sound may not be
output from the receiver. In this case, select
“AMP.”
• When you do not select an HDMI input jack as an
audio input in “Audio Input Assign” in the Input
Settings menu, sound is not output from the TV.
x
AMP
The HDMI audio signals from the playback
equipment is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
When “Control for HDMI” is set to “On,” “Audio
Out” may be changed automatically.
Lets you turn the function which controls
equipment connected to the HDMI jack using
an HDMI cable on or off.
x
Off
x
On
Lets you output HDMI signals to the TV even
when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 80).
x
Off
x
On
Input Settings
You can adjust the settings for the connections
of the receiver and other equipment.
Lets you set the following items for each input.
x
Watch/Listen
Sets whether an input is displayed on the
Watch menu or the Listen menu.
– Watch: Displays an input to the Watch menu.
– Listen: Displays an input to the Listen menu.
– Watch/Listen: Displays an input to both the
Watch and Listen menus.
– Hidden: Does not display an input to both
the Watch and Listen menus. When you
select an input, you can skip an input which
is set to “Hidden.”
x
Icon
Sets the icon displayed on the Watch/Listen
menu.
x
Name
Sets the name displayed on the Watch/Listen
menu.
Note
You cannot select an input which is set to “Hidden,”
or “HIDDEN” in “INPUT SKIP” in “INPUT”
(page 113) without using the GUI, even if you use
INPUT SELECTOR on the receiver.
Lets you set the audio input jack(s) assigned to
each input.
For details, see “Using other video/audio input
jacks” (page 82).
x
HDMI
HDMI IN 1/2/3/4/5, none
x
Digital
OPT IN 1/2/3/4, COAX IN 1/2, none
Control for HDMI
Pass Through
Input Edit
Audio Input Assign
continued
