Sony STR-DA3500ES Operating Instructions Manual Download Page 109

Page: 109 / 148

109

D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\090OTH.fm

masterpage: Right

STR-DA3500ES
4-144-907-

(1)

Other Oper

ations

Recording using the
receiver

You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.

You can record onto a MiniDisc or audio tape
using the receiver. Refer to the operating
instructions supplied with your MD deck or
tape deck.

Press the input button of the
playback component.

You can also use INPUT SELECTOR on
the receiver.

Prepare the playback
component for playing.

For example, insert a CD into the CD
player.

Prepare the recording
component.

Insert a blank MD or tape into the
recording deck and adjust the recording
level.

Start recording on the
recording deck, then start
playback on the playback
component.

Notes

• Sound adjustments do not affect the signal output

from the MD/TAPE OUT jacks.

• The audio input signals from the MULTI

CHANNEL INPUT jacks are not output.

To record digital sound

Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/TAPE OUT jack.

Input
buttons

Recording onto a MiniDisc or
audio tape

Summary of Contents for STR-DA3500ES





















































































































































Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands

Sony STR-DA3500ES, Operating Instructions Manual

Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands