Sony STR-DA2100ES Operating Instructions for STRDA2100ES Operating Instructions Manual Download | Manualshive

Page: 33 / 68

background image

Enjo

yin

g

Surr

o

und

Sound

masterpage:Right

lename[E:\SEM_Janet\Revision

Data\J9050000_2580805131DA2100ES_US\2580805131\US05SND_STR-DA2100ES-U.fm]

33

US

model name1[STR-DA2100ES]

[2-580-805-

13

(1)]

To turn off the surround effect

Press 2CH to select “2CH STEREO” or press
A.F.D. repeatedly to select “A.F.D. AUTO”.

Tips

• The receiver lets you apply the last selected sound

field to an input whenever it is selected (Sound Field
Link). For example, if you select HALL for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, HALL will
automatically be applied again.

• You can identify the encoding format of DVD

software, etc. by looking at the logo on the package.

–

: Dolby Digital discs

–

: Dolby Surround encoded

programs

–

: DTS Digital Surround encoded programs

Notes

• Sound fields do not function for the signals with a

sampling frequency of more than 48 kHz.

• When one of the following sound fields are selected,

no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the SET UP menu.
However, the sound will be output from the sub
woofer if the digital input signal contains LFE (Low
Frequency Effect) signals, or if the front, or surround
speakers are set to “SMALL”.

– HALL

– JAZZ CLUB

– LIVE CONCERT

This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in Dolby Digital EX,
DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
format, you can enjoy the surround sound
intended by the filmmakers.

Press SURR BACK DECODING repeatedly
to select the surround back decoding
mode.

For details, see “How to select the surround back
decoding mode” on page 34.

Tip

You can select the surround back decoding mode using
“SB DEC XXXX” in the CUSTOMIZE menu
(page 39).

Note

You can select the surround back decoding mode only
when A.F.D. mode is selected except for Dolby Pro
Logic IIx mode (page 30).

Selecting the surround
back decoding mode

— SURR BACK DECODING

continued

US01COV_STR-DA2100ES-U.book Page 33 Wednesday, July 13, 2005 2:17 PM

«
...
31
32
33
34
35
...
»

Summary of Contents for STR-DA2100ES Operating Instructions for STRDA2100ES





































































Reviews:

No comments

Related manuals for STR-DA2100ES Operating Instructions for STRDA2100ES

Brand: Handic Pages: 21

Brand: NAD Pages: 2

Brand: Harman Pages: 30

Brand: Kathrein Pages: 20

Brand: Quark-Elec Pages: 2

Brand: Aiwa Pages: 10

Brand: Ceragon Pages: 63

Brand: Clarion Pages: 162

Brand: Sangean Pages: 6

Gewa Andromeda REC4

Brand: Abilia Pages: 48

Brand: Radio Shack Pages: 61

ATLONA HDR-EX-70-2PS

Brand: Panduit Pages: 12

Brand: Axxera Pages: 31

Brand: Alinco Pages: 37

A25C SPORT 66 USA

Brand: Icom Pages: 4

Brand: Novus Pages: 72

Brand: elv Pages: 8

Brand: Icom Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands