12
Chapter 2 Specifications
2.2. Product Features and Functions
2.2.1. Front
A
Ventilation Holes
Be careful not to block the ventilation holes. If the ventilation holes are blocked,
the AIT autoloader may overheat, resulting in damage.
B
Front Door
Used in inserting and ejecting AIT cartridges. Press the DOOR button to unlock
and open the door. The AIT autoloader cannot operate when the door is open,
therefore when inserting or replacing a cartridge, be that the door is securely
closed. When the door is closed it locks automatically.
C
DOOR Button
Press to open the front door. Do not press this button while the AIT autoloader
is operating.
D
CLEAN Button
Insert the cleaning cartridge in slot CL/8 and press for at least three seconds to
clean the AIT drive.
E
Message Display
The message display displays how many cartridges are in the AIT autoloader.
When in normal standby state, it displays the status of the AIT autoloader.
F
ERROR/WARNING LED
Lights or flashes orange when a specific operation is necessary or an error
occurs. When it lights it indicates a warning, whereas when it flashes it indicates
an error. When this happens, a 2-character code appears on the message display.
For details about these codes, see “Error Code List” (page 147), “Other
Messages” (page 151), or the code reference table.
G
CLEANING LED
Flashes green when the AIT drive is in need of cleaning. For details about
cleaning the AIT drive, see “Cleaning the AIT Drive” (page 46).
AIT LIBRARY LIB-D81
CLEAN
DOOR
WARNING
CLEANING
ERROR
2
1
3
4
5
6
7
