78
Chapter 6 Using the Library Administration Menu
The “Life Count” page appears.
In the “Life Count” page, the numbers of times the following specific parts
have been operated are displayed.
• Slider
• Picker
• Turn Table
• Shutter
• Fan (During operation)
• Drive
• Boot
• Flash
Error Count
In “Error Count”, the number of times an operation was tried or an error
occurred in a specific part is displayed.
1
In the Library Administration Menu, click “Maintenance”, then click
“Error Count”. You can also directly click “Error Count”, which is located
above “Maintenance”.
Note
Each access to the Maintenance Menu requires the password to be entered.
Enter the password, then click “OK”. For information about the password,
refer to “Password” (page 75).
