Sony ST-SDB900, Operating Instructions Manual

Page: 11 / 28

Re
cei
ving
Br
oa
dca
s
ts
11 GB
Receiving broadcasts by
scanning stations
(Automatic Tuning)
With automatic tuning you can quickly tune in a
station without having to know its frequency.
1
Press BAND repeatedly to select DAB,
FM or AM for the desired type of
broadcast.
When selecting DAB, “DAB Tuning” will
appear in the display while the tuner is
collecting DAB data. Please wait until this
message disappears.
2
Press TUNING MODE to display AUTO.
3
Turn TUNING/SELECT slightly and
release it when the service component
(DAB) or frequency (FM/AM) numbers
start changing.
Turn the control to the right or left to tune in
a service component (DAB) or frequency
(FM/AM).
When the tuner locates a station, it stops
automatically. “TUNED” appears in the
display.
4
Repeat step 3 until you tune in the
appropriate station.
To store the station, operate steps 4 to 6 in
“Storing stations manually” (page 12).
Notes
• When tuning in a DAB station, it may take a few
seconds before you hear any sound.
• Before you can receive DAB, you must complete the
DAB INIT SCAN procedure (see “Before you can
receive DAB stations” on page 9).
If you cannot tune in the station
you want (Manual Tuning)
(FM/AM bands only)
With manual tuning you can search through all
stations broadcasting on each band, and tune in
stations with extremely weak signals that you
might not be able to receive with automatic
tuning.
1
Press BAND repeatedly to select FM or
AM for the desired type of broadcast.
2
Press TUNING MODE so that
“MANUAL” appears in the display.
3
Turn TUNING/SELECT until you tune in
the station you want.
Turn the control to the right for a higher
frequency; turn it to the left for a lower
frequency.
Receiving Broadcasts
Receiving DAB/FM/AM
broadcasts
BAND TUNING/SELECT
TUNING MODE