Chapter
3
58
Projecting the Picture
Ch
apt
er 3 Proj
ec
tin
g
Projecting
Projecting the Picture
Use a computer in which the supplied SRX Controller is
installed to project the picture on the screen.
1
Set the power switch at the rear of the projector to the
upper position.
The MAIN and LAMP indicators light red and the
projector goes into standby mode.
2
Start your computer and double-click the
icon of
the SRX Controller in the desktop window.
The Program Launcher screen appears.
3
Select the projector you want to operate by double-
clicking the projector.
The SRX Controller starts and the Control Function
Menu window appears.
When you connect the projectors to the computer via a
network, you can also select the projector you want to
operate by specifying the IP address of the projector. If
connection is made via the RS-232C connector on the
projector, specify the RS-232C port number of the
computer.
For details, see “Changing the Connection Mode” on
page 55.
4
Click the “POWER ON
?
” button to turn on the
projector.
The MAIN and LAMP indicators light green.
LAMP indicator
1
MAIN indicator
3
6
4
7
Note
8,10
9
Summary of Contents for SRX-T420
Page 39: ......