7
g
HDMI IN 1/2 (HDMI input 1/2) connector
For HDMI signal input.
For details on signal format, see “HDMI signals”
(page 42).
Digital Cinema Server XCT-S10
Front
a
POWER indicator
Shows the status of the server’s power.
For further details, see “How to Read the Indicators”
(page 37).
b
SYSTEM SW switch
Starts up the server.
c
(HDD) 1/2 indicator
Shows the status of the HDD.
For further details, see “How to Read the Indicators”
(page 37).
d
Ventilation holes (intake)/air filter
For details on air filter cleaning, refer to the
“Maintenance Manual.”
e
INGEST PORT 1/2 connector
For inserting HDD or USB memory to ingest DCP/
KDM.
These can only be used for a USB HDD or USB
memory device.
For further details, see “Ingesting from HDD via
USB Connector” (page 16), and “Ingesting from a
USB Flash Drive” (page 19).
f
CRU DATAPORT
For inserting HDD to ingest DCP/KDM.
A CRU DATAPORT carrier is necessary to use the
CRU DATAPORT. For further details, contact
qualified Sony service personnel.