background image

Bulletin No.: 036                                                      

19

th

 February, 2013 

SRX-R515P 

 

DCinema Bulletin Archive: 

https://filex.sony-europe.com/

 

Login and navigate to

 

Dealers/Digital Cinema Bulletins 

folder

 

SRX-R515P v1.00.0 Networking Functionality 

Overview 

The SRX-R515P with v1.00.0 software is now available but cannot be connected to the Sony 
TMS until the next version up. The SRX-R515P however is still capable of being controlled 
over the network and accessing DCP and KDMs from a central storage device. This allows 
the R515 to be installed at inaccessible locations, such as projection pods, but still able to be 
operated over the network. Below is a list of functions that are described in this document: 

  Network overview of SRX-R515P 

  Configuring SRX-R515P IP addresses 

  Configuring Storage Server IP addresses 

  Accessing the R515 GUI over the network 

  Setting up a folder share for DCP/KDM ingest over the network 

  Configuring R515 to access a folder share for DCP/KDM ingest 

  Configuring R515 to access a FTP server for DCP/KDM ingest 

Note. It is not recommended to perform ingesting operations or SPL editing during 
play-out when using SRX-R515P v1.00.0 software. This is expected to be improved in 
the next firmware version. 

 

 

Summary of Contents for SRX-R515P














Reviews: