Sony SRS-ZR7 Help Manual Download Page 69

Page: 69 / 281

Personal Audio System

SRS-ZR7

Connecting to a Wi-Fi network using SongPal (iPhone/iPod touch)

You can connect the speaker to a Wi-Fi network using SongPal installed on your iPhone/iPod touch. First, make a BLUETOOTH

connection between the speaker and the iPhone/iPod touch. Then configure the Wi-Fi network settings. Wi-Fi network settings in

SongPal are sent from your iPhone/iPod touch to the speaker via BLUETOOTH.

Complete step

within 15 minutes after turning on the speaker. If the speaker is not operated for more than 15 minutes, the

speaker enters the standby mode automatically by the auto standby mode.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker closer to the wireless router.

Before starting this procedure, be aware that the setting information of your Wi-Fi network will not be protected until the setting is

complete. After the setting is complete, the setting information of your Wi-Fi network will be protected again when you set wireless

LAN security.

The specification and design of the application may change without notice.

Connect your iPhone/iPod touch to your wireless router.

Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker does not support IEEE

802.11ac.

Search for SongPal at the App Store and download it onto your iPhone/iPod touch.

SongPal

Summary of Contents for SRS-ZR7















































































































































































































































































Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands

Sony SRS-ZR7, Help Manual

Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands