Sony SRS-ZR7 Help Manual Download Page 64

Page: 64 / 281

Help Guide

Personal Audio System

SRS-ZR7

Connecting to a Wi-Fi network using SongPal (Smartphone)

You can connect the speaker to a Wi-Fi network using SongPal installed on your smartphone. First, make a BLUETOOTH

connection between the speaker and the smartphone. Then configure the Wi-Fi network settings. Wi-Fi network settings in

SongPal are sent from your smartphone to the speaker via BLUETOOTH.

Complete step

within 15 minutes after turning on the speaker. If the speaker is not operated for more than 15 minutes, the

speaker enters the standby mode automatically by the auto standby mode.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker closer to the wireless router.

Before starting this procedure, be aware that the setting information of your Wi-Fi network will not be protected until the setting is

complete. After the setting is complete, the setting information of your Wi-Fi network will be protected again when you set wireless

LAN security.

The specification and design of the application may change without notice.

Connect your smartphone to your wireless router.

Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker does not support IEEE

802.11ac.

Have the Wi-Fi network name (SSID) and password of the wireless router available for reference.

Some wireless routers have multiple SSIDs. Be sure to have the SSID that your smartphone is connected to.

For details, refer to the operating instructions supplied with your wireless router.

Install SongPal on your smartphone.

Search for SongPal at Google Play™.

SongPal

Turn on the speaker.

Summary of Contents for SRS-ZR7















































































































































































































































































Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands

Sony SRS-ZR7, Help Manual

Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands