Sony SRS-ZR7 Help Manual Download Page 44

Page: 44 / 281

Help Guide

Personal Audio System

SRS-ZR7

Connecting a PC/Installing the driver

You can connect a PC to the USB-B port (

B) with a commercially-available USB cable.

To play High-Resolution Audio format files

The speaker is compatible with High-Resolution Audio format (192 kHz/24 bit).

To play High-Resolution Audio format files on your PC with the speaker, you need to download and install "Media Go" and "Hi-

Res Audio Player" to your PC.

Note

Sony does not guarantee correct operation when a USB hub or USB extension cable is used.

Do not disconnect the PC during operation. To prevent damage to data, stop playback, then turn off the power of the speaker before disconnecting

Connect a PC to the USB-B port (

B) with a commercially-available USB cable.

When connecting to a Windows PC, the driver is automatically installed. If it is not installed automatically, visit one of the

following websites, and download and install the driver.

For customers in Europe:

http://www.sony.eu/support

For customers in the USA:

http://esupport.sony.com/US

For customers in Canada:

http://esupport.sony.com/CA/

For customers in other countries/regions:

http://www.sony-asia.com/section/support

For details how to install the application, follow the instructions on the website.

Summary of Contents for SRS-ZR7















































































































































































































































































Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands

Sony SRS-ZR7, Help Manual

Search results

Summary of Contents for SRS-ZR7

Reviews:

Related manuals for SRS-ZR7

Brands by name

Popular brands