Sony SRS-XP500 Help Manual Download

Page: 17 / 100

Help Guide

Wireless Speaker

SRS-XP700 / SRS-XP500

Auto Standby function

If the speaker satisfies the following conditions for about 15 minutes, it turns off automatically.

At the time of purchase, the Auto Standby function is set to on.

When the speaker is in BLUETOOTH mode

No operation on the speaker.

The connected BLUETOOTH device is not playing music (audio), nor is it being operated.

When the speaker is in AUDIO IN mode

No operation on the speaker.

No music (sound) is played on an audio device connected to the AUDIO IN jack or the music (sound) of an audio

device connected to the AUDIO IN jack is too small.

When the speaker is in USB mode

No operation on the speaker.

No music (sound) is played on a USB device connected to the PLAY/CHARGE port (USB1) or the music (sound) of a

USB device connected to the PLAY/CHARGE port (USB1) is too small.

Hint

You can turn on or off the Auto Standby function by using “Sony | Music Center.”

Note

While a microphone or a guitar is connected to the speaker, the Auto Standby function is turned off.

While the speaker is supplying power to the other device, the Auto Standby function is turned off.

Summary of Contents for SRS-XP500
































































































Search results

Summary of Contents for SRS-XP500

Reviews:

Related manuals for SRS-XP500

Brands by name

Popular brands

Sony SRS-XP500, Help Manual

Search results

Summary of Contents for SRS-XP500

Reviews:

Related manuals for SRS-XP500

Brands by name

Popular brands