Sony SRS-XP500 Help Manual Download Page 13

Page: 13 / 100

Help Guide

Wireless Speaker

SRS-XP700 / SRS-XP500

Using the BLUETOOTH standby function

When the BLUETOOTH standby function is turned on, the speaker turns on automatically by operating a BLUETOOTH

device, and starts the BLUETOOTH connection.

Before operating the speaker, note the following:

The BLUETOOTH standby function turns on only while the speaker is connected to an AC outlet by the supplied AC

power cord (mains lead). While the speaker is running only on power from the rechargeable built-in battery, the

BLUETOOTH standby function is turned off.

Turn on the speaker.

The (power) indicator lights up in green.

Tap [Music Center] on your smartphone, etc. to start up the application.

Music Center

Tap [SRS-XP700] or [SRS-XP500].

Summary of Contents for SRS-XP500
































































































Search results

Summary of Contents for SRS-XP500

Reviews:

Related manuals for SRS-XP500

Brands by name

Popular brands

Sony SRS-XP500, Help Manual

Search results

Summary of Contents for SRS-XP500

Reviews:

Related manuals for SRS-XP500

Brands by name

Popular brands