Wireless Speaker
SRS-XB40
Making a call
You can enjoy hands-free calls with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-free
Profile) or HSP (Headset Profile) via BLUETOOTH connection.
If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with the
mobile phone.
Connect the speaker with a BLUETOOTH mobile phone.
The
(BLUETOOTH) indicator lights up in white when the BLUETOOTH connection is established.
When using the Speaker Add function or Wireless Party Chain function
Connect to the speaker where the
(BLUETOOTH) indicator is flashing in white. In the following steps and operations
during a hands-free call, operate the speaker that is connected to the BLUETOOTH mobile phone.
1
Operate the BLUETOOTH mobile phone to make a call.
When you make a call, playback pauses and the dial tone is heard from the speaker. When the receiver takes the call, talk
into the microphone of the speaker.
If no dial tone is heard via the speaker
The speaker may not be connected with a BLUETOOTH mobile phone with HFP or HSP. Check the connection status on
the BLUETOOTH mobile phone.
Switch the call device to the speaker by pressing and holding the
(call) button for about 2 seconds.
2
82
