Wireless Speaker
SRS-XB31
Pairing and connecting with BLUETOOTH devices
When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available), or connect it to a booted
computer. Or, charge the built-in battery sufficiently.
Stop playback on a BLUETOOTH device.
Turn down the volume of the BLUETOOTH device and speaker to avoid any sudden loud sound output from the
speaker. Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the speaker.
The (power) indicator lights up in white
*1
.
The
(BLUETOOTH) indicator begins to flash in blue.
When you turn on the speaker for the first time after purchase, the
(BLUETOOTH) indicator will begin to
flash quickly and the speaker enters pairing mode automatically by just pressing the (power) button/
PAIRING button. Proceed to step
.
When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected
BLUETOOTH device. If the device is nearby and its BLUETOOTH function is on, the BLUETOOTH connection
is established automatically and the
(BLUETOOTH) indicator stays lit. In this case, turn off the BLUETOOTH
function or turn off the power of the currently connected BLUETOOTH device.
1
Depending on the Sound Mode, the color of the (power) indicator varies. For details, refer to the following topic.
*1
Press and hold the (power) button/
PAIRING button until you hear the voice guidance and the
(BLUETOOTH) indicator begins to flash quickly.
The speaker enters pairing mode.
2
16
