Sony SRS-XB23, Help Manual

Page: 7 / 99

Help Guide
Wireless Speaker
SRS-XB43
Charging the speaker
The speaker is capable of running on power either from an AC outlet connected by the AC adaptor (supplied) or from the
rechargeable built-in lithium-ion battery.
When using the speaker for the first time, be sure to charge the built-in battery for more than 1 hour before turning on the
speaker.
With the built-in battery charged in advance, you can use the speaker solely with battery power.
Checking the charging completion
If the built-in battery is fully charged when you connect the speaker to an AC outlet, the CHARGE indicator lights up in
orange then turns off after about 1 minute.
Checking the built-in battery level of the rechargeable built-in battery
After pressing the BATT (battery) button behind the cap on the rear side of the speaker, when the speaker is turned on,
the voice guidance listed below is output from the speaker depending on the remaining built-in battery power.
80% or more: “Battery fully charged”
60% or more: “Battery about 70%”
40% or more: “Battery about 50%”
20% or more: “Battery about 30%”
Less than 20%: “Please charge”
Built-in battery life (using a BLUETOOTH connection)
About 24 hours
The volume level of the speaker is set to 31.
The lighting function is set to off.
The sound effect is set to STAMINA.
About 14 hours
Connect the speaker to an AC outlet to charge it.
Connect the supplied AC adaptor to the DC IN 5V port on the speaker and an AC outlet.
Battery charging starts and the CHARGE indicator lights up in orange. Charging will complete in about 5 hours
*
and
the indicator will turn off.
After you disconnect the AC adaptor from the speaker upon completion of battery charging, be sure to close the
cap securely.
The cap plays a very important role in maintenance of the waterproof and dust proof performance.
1
Time that is required to charge the empty built-in battery to its full capacity when the speaker turns off. *
7